RETON Ring Mesh Co., Ltd.A Professional, Reliable And Experienced Metal Products Manufacturer
+86-18632192156 sales@rt-ringmesh.com
Stainless steel short gloves provide hand protection with a cuff that ends at or near the wrist. The short cuff design offers protection to the hand and lower wrist while providing maximum freedom of movement. Stainless steel short gloves are used in applications where forearm protection is not required but hand protection against cuts and punctures is essential. The short cuff design allows workers to perform tasks with full wrist mobility.
Stainless steel short gloves are constructed from interlocked stainless steel rings using the four-to-one weave pattern. The ring construction provides cut resistance and puncture protection to the entire hand. The short cuff of stainless steel short gloves typically measures 100 to 150 millimeters from the wrist crease. This length provides coverage to the wrist bone while allowing unrestricted wrist movement.
Stainless steel short gloves are designed with features that balance protection and dexterity. The short cuff design reduces glove weight by 15 to 20 percent compared to long cuff versions. The reduced weight decreases hand fatigue during extended use. Stainless steel short gloves are available in multiple gauge options from 7 gauge to 15 gauge.
The cuff of stainless steel short gloves features a closure mechanism that secures the glove to the wrist. The closure types include stainless steel spring clips, hook and loop straps, and elastic bands. The short cuff design allows the closure to be positioned at the wrist, providing a secure fit without restricting wrist movement.
Stainless steel short gloves are manufactured with a seamless ring construction that eliminates pressure points on the hand. The rings are interlocked in the four-to-one pattern, creating a flexible mesh that conforms to the hand shape. The ring flexibility allows workers to grip tools and materials without compromising protection.
Stainless steel short gloves are sized based on palm circumference and hand length. The palm circumference is measured at the metacarpal joint, and the hand length is measured from the wrist crease to the tip of the middle finger. Stainless steel short gloves should fit snugly without creating pressure points or restricting blood circulation.
The following table shows the sizing specifications for stainless steel short gloves from RETON Ring Mesh Co., Ltd.
| Glove Size | Palm Circumference mm | Hand Length mm | Cuff Length mm | Glove Weight grams |
|---|---|---|---|---|
| Extra Small | 152-177 | 160-174 | 100-120 | 85-95 |
| Small | 178-203 | 175-189 | 100-120 | 95-105 |
| Medium | 204-229 | 190-204 | 120-150 | 105-120 |
| Large | 230-254 | 205-219 | 120-150 | 120-135 |
| Extra Large | 255-279 | 220-234 | 150 | 135-150 |
Stainless steel short gloves are suitable for applications where hand protection is required but forearm protection is unnecessary. The primary applications include light food processing, fish processing, vegetable cutting, and light assembly operations. Stainless steel short gloves are also used in retail butchery and catering operations.
In light food processing, stainless steel short gloves protect workers during vegetable cutting, fruit preparation, and meat trimming. The short cuff allows workers to change gloves quickly between tasks. The reduced weight of stainless steel short gloves decreases fatigue during long shifts. Workers report better dexterity with short cuff gloves compared to long cuff versions.
In fish processing, stainless steel short gloves protect against cuts from fish knives and punctures from fish bones and spines. The short cuff design allows workers to handle fish without the glove cuff interfering with the cutting motion. Stainless steel short gloves with 13 gauge construction are recommended for fish processing because the higher ring density provides better puncture resistance.
In retail butchery, stainless steel short gloves protect butchers during cutting and trimming operations. The short cuff allows the butcher to wear the glove comfortably for extended periods. The glove can be easily removed for cleaning between product changes. Stainless steel short gloves with 10 gauge construction are recommended for retail butchery.
Stainless steel short gloves provide the same cut resistance as long cuff gloves because the ring construction is identical. The EN388 cut resistance testing measures the force required to cut through the glove material. The test results for stainless steel short gloves are comparable to those for long cuff gloves of the same gauge and wire thickness.
The following table shows the cut resistance data for stainless steel short gloves from RETON Ring Mesh Co., Ltd.
| Glove Gauge | Wire Diameter mm | EN388 Cut Level | Average Cut Force N | Puncture Resistance N |
|---|---|---|---|---|
| 7 gauge | 0.45 | Level E | 26.8 | 72 |
| 10 gauge | 0.42 | Level E | 27.5 | 68 |
| 13 gauge | 0.38 | Level F | 31.6 | 82 |
| 15 gauge | 0.35 | Level F | 32.8 | 78 |
The cut resistance of stainless steel short gloves is maintained throughout the glove's service life. The metal rings do not degrade from exposure to oils, solvents, or cleaning chemicals. The cut resistance is tested on each production batch to verify compliance with the specified level.
Stainless steel short gloves provide puncture protection against sharp points such as needles, bones, and glass shards. The EN388 puncture test measures the force required to penetrate the glove material with a standard point. Stainless steel short gloves with 13 gauge construction provide puncture resistance of 70 to 85 newtons, which corresponds to Level 4 under the EN388 standard.
Puncture protection is important in applications where workers handle materials with sharp points. In fish processing, workers encounter fish spines that can penetrate fabric gloves but are stopped by stainless steel mesh. In waste recycling, workers encounter broken glass and medical sharps that require puncture protection. Stainless steel short gloves provide the required puncture protection for these applications.
The comfort of stainless steel short gloves is affected by fit, weight, and flexibility. The gloves should fit snugly to provide full protection but should not restrict circulation. The weight of stainless steel short gloves ranges from 85 to 150 grams depending on the gauge and size. This weight is distributed across the hand, reducing the perceived load.
The flexibility of stainless steel short gloves comes from the four-to-one weave pattern. The rings articulate against each other, allowing the glove to bend and flex with hand movements. The short cuff design increases flexibility at the wrist because there is no extended cuff to resist bending. Workers report that stainless steel short gloves allow full range of motion for most tasks.
Stainless steel short gloves require regular cleaning and maintenance to extend service life. The cleaning process removes debris, organic material, and contaminants from the glove surface. Stainless steel short gloves can be cleaned using warm water with mild detergent, followed by thorough rinsing and drying.
The recommended cleaning procedure for stainless steel short gloves includes immersion in warm water at 40 to 50 degrees Celsius with a mild detergent. The gloves are agitated for 5 to 10 minutes to remove surface debris. The gloves are then rinsed with clean water and dried in a well-ventilated area. Stainless steel short gloves should not be exposed to high heat for extended periods because this may affect ring hardness.
Stainless steel short gloves used in food processing require more frequent cleaning and sanitization. The cleaning frequency is determined by the food safety plan and the production schedule. Most food processing facilities clean stainless steel short gloves after each shift or between product batches. The gloves are sanitized using hot water at 82 degrees Celsius or steam at 121 degrees Celsius.
The relationship between wire thickness and cut resistance is a key technical area for stainless steel short gloves. Thicker wire provides higher cut resistance because the blade must cut through more metal material to penetrate the glove. The cut resistance increases approximately linearly with wire thickness within the range of 0.35 to 0.55 millimeters.
The wire thickness also affects the weight and flexibility of stainless steel short gloves. Thicker wire increases glove weight by approximately 8 percent for each 0.05 millimeter increase. Thicker wire also reduces flexibility because the rings have higher bending stiffness. Stainless steel short gloves with 0.45 millimeter wire provide a balance of cut resistance and flexibility for most applications.
Stainless steel short gloves with 0.38 millimeter wire are recommended for applications requiring high dexterity. The thinner wire reduces weight and increases flexibility, allowing the worker to perform detailed tasks. The cut resistance of 0.38 millimeter wire is sufficient for Level F cut resistance when used in combination with the four-to-one weave pattern.
Question: What is the difference between stainless steel short gloves and standard gloves?
Answer: Stainless steel short gloves have a short cuff that ends at the wrist, providing hand protection without forearm coverage. Standard gloves may have longer cuffs or may be used to refer to non-metal gloves. Stainless steel short gloves are designed for applications where wrist and forearm protection is not required.
Question: How do I select the correct size for stainless steel short gloves?
Answer: The correct size for stainless steel short gloves is determined by palm circumference and hand length. Measure the palm circumference at the metacarpal joint and refer to the sizing table provided by the manufacturer. The glove should fit snugly without creating pressure points.
Question: Can stainless steel short gloves be used for food processing?
Answer: Yes, stainless steel short gloves are suitable for food processing applications. The gloves are made from FDA-compliant 304 or 316L stainless steel and can be cleaned and sanitized using standard food processing procedures. The short cuff design allows workers to change gloves quickly between tasks.
Question: How do I clean stainless steel short gloves?
Answer: Stainless steel short gloves are cleaned using warm water with mild detergent, followed by thorough rinsing and drying. For food processing applications, the gloves are sanitized using hot water or steam. The gloves should not be exposed to high heat for extended periods.
Question: What is the service life of stainless steel short gloves?
Answer: The service life of stainless steel short gloves is 12 to 24 months depending on usage frequency and application severity. The gloves should be inspected regularly for ring wear, broken welds, and cuff damage. Gloves with visible damage should be replaced immediately.
RETON Ring Mesh Co., Ltd. manufactures stainless steel short gloves in multiple sizes and gauge options. The company provides sizing assistance and application recommendations. For stainless steel short gloves specifications and sample requests, contact RETON Ring Mesh Co., Ltd.
Processing Demand Survey